Standard meter cable for Fleck 5600 model
Part # 14043
Meter Cable for Fleck 5600 Econominder.
Length = 8.25 inches
To Remove Cable from the meter cover, just pull up.
To Remove Cable from the Control Valve,
Use your thumb nail on your right hand to hold the “meter cable clip” down ( secure to control ), and then pull the cable with your left hand. It will come right out.
Clip For Meter Cable Assembly inside control valve.
Holds spring ( 14276 ) and ratchet gears ( clutch, 13831, and pinion, 13830 ) in place.
Cable connects through this Clip.
Then to the “Clutch” ( with a spring on the shaft and clip to apply pressure ).
Then the “clutch” drives the “Pinion” gear, that in turn moves the Program Wheel ( on the front of the control ).