O-Ring – Brine Spacer

Fleck 5600

O-ring used with the Brine Valve Piston Assembly.
There are Two used in the Valve Assembly.
One on the Brine Valve and One in the Hole that the Brine Valve sits inside.
* NOTE: This o-ring, 13302, is also used on the “drain port” between the injector drain module and valve body of the Fleck 9000 and 9100 models.

One o-ring comes on the Brine Valve Piston Assembly ( 60032 ), and the other would be sitting loose in the bottom of the hole where the Brine Valve is installed.